ALD Division
KOSS HEADPHONES NEW!
These inductive stereo headphones with telecoil are especially designed to improve sound reproduction for hearing instrument users. The headhones can be used with all kinds of hearing instruments with a telecoil, and are used for music players, radio, TV etc. The headphones are equipped with volume control and are foldable to be easy to bring along.
NECK LOOP, 2-CHANNEL, "SOFT" NEW!
New version of the neck loop above, with loop in a textile ribbon and a slightly stronger loop field. Flexible with extension cable.
© GN ReSound ALD Division 2004
Any issues relating to the EU Medical Device Directive 93/42/EEC should be directed to GN ReSound A/S.
ADAPTER FOR NECK LOOP
STANDARD/VOLUME CONTROL, DIN FEM.-MALE
Adapter with a 5 m cord for connecting a neck loop to AutoMini or Transett Mini. The adapter has a DIN jack which is connected to the neck loop, and a DIN plug which is connected to the sound source (AutoMini/Transett Mini).
Ordering Number: 200 20 26
ADAPTER FOR NECK LOOP
STANDARD/VOLUME CONTROL, DIN FEM.-3.5 mm MALE
Adapter with a DIN female contact which is connected to the neck loop, and a 3.5 mm plug which is connected to the sound source (e.g. CD/MP3 player or speech amplifier). Length of cord approx. 80 cm.
There are two versions:
Adapter Companion/Universal for Companion and other sound sources with a 3.5 mm standard contact.
Adapter for Conference and the 904-system with a 3.5 mm plug (inverted).
Ordering Number: 200 20 97
| Resistance: |
2 x 27 Ohm. |
| Inductance: |
0.4 mH. |
| Cut-off frequency: |
5.3 kHz, -3 dB rel. 1 kHz, ”stereo”. 9.3 kHz ”mono”. |
| Circumference: |
90 cm. |
| Diameter: |
28.6 cm. |
| Thickness: |
4.5 mm. |
| Weight: |
29 g. |
| Colour: |
Dark grey |
| Contact: |
3-pole angular contact, diameter 3.5 mm on 50 cm cable. |
Technical data
NECK LOOP, 2-CHANNEL
Neck loop with two channels, which means that the sound is transmitted from both the left and the right channel of the sound source, giving a mono signal in the loop. You can also connect it to your stereo or CD/MP3 player if you want.
Technical data
| Sensitivity: |
68 mV gives 100 mA/m. |
| Resistance: |
25 Ohm ±1,5 Ohm. |
| Inductance: |
0.66 mH. |
| Cut-off frequency: |
6 kHz, -3 dB rel. 1 kHz. |
| Circumference: |
90 cm. |
| Diameter: |
28.6 cm. |
| Thickness: |
4.5 mm. |
| Weight: |
25 g. |
| Colour: |
Dark grey. |
| Pin: |
DIN. |
| Sensitivity: |
10 mV for 100 mA/m. |
| Resistance: |
8-93 Ohm. |
| Circumference: |
80 cm. |
| Diameter: |
26 cm. |
| Thickness: |
5 mm. |
| Colour: |
Dark grey. |
| PIN: |
DIN. |
| Volume range: |
30 dB. |
| Weight: |
34 g. |
Ordering number:
Neck loop, volume control:
414 01 60
NECK LOOP, VOLUME CONTROL
Neck loop with a volume control and a DIN contact. The neck loop is connected to the sound source using an adapter (ordered separately).
Ordering Number:
Adapter Companion/Universal:
200 20 44
Adapter Conference/904:
411 04 50
NECK LOOP, STANDARD
Neck loop with a DIN contact. The neck loop is connected to the sound source using an adapter (ordered separately).
With a neck loop, hearing instrument users can pick up the sound from different sources, such as CD/MP3 players, loop amplifiers or speech amplifiers. The neck loop is connected to the sound source, and the hearing instrument is set to the T position.
We offer four different types of neck loops: standard, volume control, and 2-channel in two versions. See also our inductive headphones (Koss) below.
Technical data
Last updated
March 9, 2010
Ordering Number:
414 04 60
Ordering Number: 200 22 06
