Header
Man and woman talking
ALD Division
© GN ReSound ALD Division 2004

User Manual
(English, Danish, Dutch, Norwegian, Swedish)

Reception loop manual
Reception loop set
Reception Loop set
The Reception Loop is a hearing device for hearing instrument users. It is intended to be used at counters and receptions. The product consists of a loop pad (inductive loop), loop amplifier and microphone.

The inductive loop is built into a desk-pad and gives a concentrated magnetic field in the area above the desk-pad. The desk-pad can be placed directly on the counter or below the desk. The loop amplifier is an AutoMini. The microphone is mounted on a gooseneck and rests steadily on the desk.

The reception loop is very easy to connect, using the fixed cords.

Last updated June 19, 2008
Ordering number: 200 21 79
Resistance: 1.4 Ohm.
Dimensions:  Approximately 300 x 480 mm.
Contact:  DIN.
Technical data loop pad
Technical data AutoMini
Input signal: 50 mV – 12 V
Output impedance: 4 Ohm
Output power: 6 W at 4 Ohm
Rise time: 50 ms
Decay time: 100 ms
Frequency range: 100 Hz – 8 kHz, -3 dB rel. 1 kHz
Distortion: <1%
Signal-to-noise ratio: >40 dB (A-weighted)
Weight: 150 g (without mains adapter)
Dimensions: 145 x 70 x 30 mm (with fixing device about 38 mm)

External power adapter

Plug-in adapter, primary: 230 VAC 50 Hz
Plug-in adapter, secondary:
12 VAC 15 VA

 

CE symbol
Any issues relating to the EU Medical Device Directive 93/42/EEC should be directed to GN ReSound A/S.